SOLID 3/4" FLAME MAPLE CAP!
Seymour Ducan SH-2N (Jazz)in neck position. Seymour Ducan SH-1B (59) in bridge position. High voltage pots with brass shafts for reduced noise.
Improve bridge (Gotoh GE103B-T) and tail (Gotoh GE101AM-T). Both in nickel.
Improved (Japanese made) pickup selector switch.
3/4"+ (20mm) two piece maple cap. The flame pattern runs the entire thickness of cap.
solid 2 piece mahogany body.
Triple bound body, neck and headstock
Nickel hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
Two volume and two tone controls, plus a three way pickup selector switch
One piece Mahogany set neck with 13.7" (350mm) radius neck for fast play and adjustable truss rod
Ebony fret board with 22 Jumbo (2.7mm) frets and real Abalone Trapezoidal inlays
GHS strings installed at the factory and a professionally cut bone nut
A pre-cut graphite nut is also included in the bag with the trus rod adjuster for those who prefer graphite
Individually hand filed frets for professional feel and playability
Width of the neck at the nut: 1 5/8"; at the 21st fret: 2 3/16"
Neck taper/thickness at the 1st fret: 21.5 mm; at the 12th fret: 23.5mm
Overall length: 40"; Scale length: 24 3/4"
Body thickness: 2" at edge; Width at the widest point: 13"
Actual Weight is only 10 lbs
Special Note: This guitar ships with no pickguard - unlike photo
We recommend a case with this item!
How to pick the right AL model: AL Spec Comparison.