 |
This hollow body Agile produces great sound!
The AL-2800 DLX has a solid Mahogany (not a multi-ply!) arch top body, with two hollowed out cavities
The AL-2800 DLX has a high quality Canadian Flame Maple top (100% real wood top-not a photo top!)
This guitar is equipped with a vintage tremolo and roller bridge for great effects
The guitar is equipped with GHS strings (10-46) installed at the factory and a professionally cut bone nut (A pre-cut graphite nut is also included in the bag with the trus rod adjuster for those who prefer graphite)
Two Alnico humbucker pickups for improved sound
The alnicos give the AL-2800 a "warmer" more traditional sound
Maple set neck with 13.7" (350mm) radius neck for "fast" play
Rosewood fretboard with 22 jumbo (2.7mm) frets and trapezodial inlays
Frets are individually hand filed for professional feel and playability
Die-cast Grover tuners with 18-1 ratio for ultra fine tuning
Full body, neck and headstock binding
Tail piece mounting pole spacing: 3 1/4"
Bridge mounting pole spacing 3".
Width of the neck at the nut: 1 5/8"; at the 22st fret: 2 3/16 "
Neck taper/thickness at the 1st fret: 21.5 mm; at the 12th fret: 23.5mm
Overall length 40"; Scale length: 24.7"
Width at the widest point: 13", body thickness at the edge: 2"
Actual Weight is only 7.5 lbs
Alnico 2 Pickup spec:
Neck: Inductance: 8.4 Henrys, DC Resistance: 14k ohms
Bridge: Inductance 8.6 Henrys DC Resistance: 16k ohms
Note: Tremolo comes unassembled - Simply loosen the strings an insert screw.
Note: Headstock may vary
|
