Agile AL-3200MCC Black Flame Damn Wide (Advanced Order 5-27)

Agile AL-3200MCC Black Flame Damn Wide (Advanced Order 5-27)

$599.95

Special Heel and Body Contour and Now Also With Multi-Radius for Improved Comfort and Ease of Play!

Advanced Order: This item is currently in high demand. The target ship date for orders placed today is May 27, 2024. Actual ship date may vary. Rondo Music recommends ordering prior to the target ship date as this item often sells out well in advance.

Multi-radius - 12" at the nut and 16" at the 22nd fret for vastly superior comfort

Neck-through design for improved sustain and playability

Body and neck contour for extra comfort and access to higher frets

Graph Tech NVS2 bridge with string saver saddles

Extra wide neck version (1 7/8" at the nut) for those looking for wider string spacing.

Two Giovanni GVH -1 type V Alnico humbucker pickups create that classic PAF traditional sound

Solid mahogany arch top body

Upgraded wiring, pots (high voltage with brass shafts for reduced noise), and pickup selector switch

5 piece neck-through (maple/walnut) neck and dual action adjustable truss rod

Ebony fretboard with 22 jumbo frets and mother of pearl trapezoid inlays

More Details

Multi-radius - 12" at the nut and 16" at the 22nd fret for vastly superior comfort

Coil tapping on both pickups for a wider range of sounds

Graph Tech NVS2 bridge with string saver saddles

Extra wide neck (1 7/8" at the nut) for those looking for wider string spacing.

3/4" solid maple cap improves overall sound quality (increases brightness of the guitar)

Neck-through design for improved sustain and playability

Body and neck contour for extra comfort and access to higher frets

Maintains same neck angle as a typical set neck single cut guitar

Graph Tech NVS2 bridge with string saver saddles

Two Giovanni GVH -1 type V Alnico humbucker pickups create that classic PAF traditional sound

Solid mahogany arch top body

Flame maple top

Bound body, neck, and headstock

Improved nickel plated hardware, including nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)

Upgraded wiring, pots (high voltage with brass shafts for reduced noise), and pickup selector switch

Two volume controls, two tone controls, plus a three way pickup selector switch

5 piece neck-through (maple/walnut) neck and dual action adjustable truss rod

Ebony fretboard with 22 jumbo frets and mother of pearl trapezoid inlays

D'addario strings installed at the factory and a professionally installed Graph Tech nut

Individually hand filed frets for professional feel and playability

Specifications

Overall length: 40"

Scale length: 24 3/4"

Width of the neck at the nut: 1 7/8" (47 mm)

Width of the neck at the 21st fret: 2 1/4" (57 mm)

Spacing between the strings at the nut: 9/32" (1 1/2" overall) (7.25mm)

Spacing between the strings at the bridge: 3/8" (10 mm)

Neck taper/thickness at the 1st fret: 3/4" (19 1/2 mm)

Neck taper/thickness at the 12th fret: 7/8" (21 1/2 mm)

Width at the upper bout: 9 1/4"

Width at the lower bout: 13 5/16"

Body thickness at edge: 1 15/16"

Weight: only 10 pounds

Bridge Pickup Resistance: 13.2 ohms Tapped: 6.60 Ohms

Neck Pickup Resistance 12.7 ohms Tapped: 6.36 Ohms

Wiring Diagram

Video

Customer Comments

I just wanted to drop you a line regarding my recent Al 3200 purchase. I can’t believe the quality of the flame top & the outstanding workmanship, this guitar rivals anything I’ve seen or owned well into the $4800.00 category. The next unexpected surprise was the sound, the Alnico 5 Humbuckers sound excellent, somehow doing both clean and distorted sounds seamlessly. I don’t know why I didn’t buy Rondo’s top of the line models before, but I will from now on. Thanks Again for creating excellent guitars for a very affordable prices.
Thanks
Dennis Kayser

Really I just love this guitar. I've been playing is constantly and cannot seem to put it down. It's probably the nicest looking, sounding and playing instrument I've ever owned. I've already ordered another Agile AL-2000 w/Floyd Rose to put some super HOT pickups in for a more modern sound because I just love the stock pickups in the 3200 too much. I would personally hunt down and kill anyone who took this guitar. Failing that I would replace it with another Agile Neck-Thru 3200.
Reviewed by: triumph650 on ultimate-guitar.com

I just wanted to say I received my order today, I can't believe how fast you got that to me! Way before the estimated delivery date! My husband's birthday is this Sunday and I was afraid I was going to have to give him his present after, but you just made my whole weekend!! THANK YOU! ps-looks beautiful, too!! (via amazon)

Hi,I just wanted say Thanks,I received my Agile AL today.First of all it's Beautiful,next it plays & sounds as good as it looks.It is as nice as any guitar Iv'e ever had & Iv'e had & still have more than a few.Again Thanks!!
From: David Woodworth

Hi, I just want to say this was by far the best present my son has ever gotten. I think he almost passed out. :) Thank you is not enough!!!! Sounds great!
Abidadaywillkeepthedoctoraway via ebay

in my personal shopping experiences for years with this company it's my humble pleasure to write this statement that "RondoMuisc.com are the VERY BEST in the WORLD when it come to Electric Bass Guitars & Their Prices" i mean that with all sincerity!
Armando P.

FAQ

Question: How does the AL-3200 compare to the other Agile AL Models?
Answer: Please see AL Specification Comparison

Question: I received my AL-3200 and there is some fret buzz. What do I do?
Answer: Your guitar was set up and buzz free when it was shipped. However the neck may have moved during shipment. This video should help: Set Up Tips.

Question: What is your return policy for this item?
Answer: See our detailed policy by clicking on "Return Policy" on the right side of the home page.

Question: Where are Agile guitars made?
Answer: Agile guitars are made in South Korea, Vietnam, and Indonesia.