|
3/4" New Hampshire Spalted Maple Top !
Solid mahogany (not a multi-ply!) arch top body
High quality 3/4" Spalted Maple Top (100% real Maple top-not a photo top!)
Ships with hard-shell case
Note - Headstock is Natural - Not black as shown
Improved Nickel plated hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
Two Type V Alnico humbucker pickups for warm, traditional sound
2 conductor braided 18 gauge American wire for pickups, high voltage pots with brass shafts for reduced noise and an improved pickup selector switch
Two volume and two tone controls, plus a three way pickup selector switch
Ebony fretboard with 22 Jumbo frets and real Abalone Block inlays
D'addario strings installed at the factory and a professionally cut graphite nut
Individually hand filed frets for professional feel and playability
Width of the neck at the nut: 1 5/8"; at the 21st fret: 2 3/16"
Neck taper/thickness at the 1st fret: 21.5 mm; at the 12th fret: 23.5mm
Overall length: 40"; Scale length: 24.7"
Body thickness: 2" at edge; Width at the widest point: 13"
Bridge pole spacing is 3", and the Tail piece pole spacing is 3 1/4"
Actual Weight is only 10 lbs
|
