alcarvedtopflatbacksample1

Agile AL-3020 Flat Black


Solid mahogany CNC carved arch top body with bound body, neck, and headstock

Grover Rotomatic tuners; Cepheus T-003 wide throw tune-O-matic bridge; Type V Alnico humbucker pickups; and Graph Tech Tusq nut

Adjustable truss rod

Stop-bar tailpiece transfers string vibration to the body of the guitar and produces superior sustain

Comfortable feel that will make you want to play for hours

Qty Price: $425.00



  • Details
  • Specifications
  • FAQ
  • Accessories
  • Solid mahogany (not a multi-ply!) CNC carved arch top body
  • Eye catching redBound neck, and headstock
  • Chrome die-cast Grover Rotomatic tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
  • High output Type V Alnico humbucker pickups with red bobbin create that warm, traditional sound (humbucker pickups help reduce hum and noise and offer superior performance by giving a thicker fuller sound than single coils; humbuckers also create a much larger magnetic field, which helps eliminate dead spots and increases overall power of the pickup)
  • Adjustable truss rod in neck to offset alterations caused by changes in humidity, temperature, or new strings
  • High voltage, brass shaft pots for reduced noise and an improved pickup selector switch
  • Two volume controls, two tone controls, and a 3-way pickup selector switch allow a wide range of expressive control
  • Cepheus T-003 wide throw tune-O-matic bridge with graphite saddles
  • Set-in maple neck with ebony fretboard
  • 22 jumbo frets and red block inlays
  • 13.7" (350 mm) radius neck for fast play
  • D'addario 10-46 strings installed at the factory along with a professionally cut Graph Tech Tusq nut!
  • Individually hand filed frets for professional feel and playability
  • Stop-bar tailpiece transfers string vibration to the body of the guitar and produces superior sustain
  • Made in South Korea
  • Measurements
  • Overall length: 40"
  • Scale length: 24 3/4"
  • Width of the neck at the nut: 1 11/16" (42.8 mm)
  • Width of the neck at the 21st fret: 2 3/16" (56 mm)
  • Spacing between the strings at the nut: 1/4" (7 1/2 mm)
  • Spacing between the strings at the bridge: 3/8" (10 mm)
  • Overall string spacing at the nut: 36 mm
  • Overall string spacing at the bridge: 52 1/2 mm
  • Neck taper/thickness at the 1st fret: 3/4" (19 1/2 mm)
  • Neck taper/thickness at the 12th fret: 7/8" (21 1/2 mm)
  • Width at the upper bout: 9 1/4"
  • Width at the lower bout: 13 5/16"
  • Body thickness at the edge: 1 15/16"
  • Weight: only 10 pounds!
  • High output pickup: 12.5K bridge 7.9K neck.
  • Wiring Diagram
  • Question: I received my guitar and there is some fret buzz. What do I do?
    Answer: Your guitar was set up and buzz free when it was shipped. However the neck may have moved during shipment. This video should help: Set Up Tips.

    Question: What is your return policy for this item?
    Answer: See our detailed policy by clicking on "Return Policy" on the right side of the home page.

    Question: Where is the guitar made?
    Answer: Agile guitars are made in South Korea and Vietnam.