septor827rncpcfoceanburstquilt1

Agile Septor 827 RN CP CF Ocean Burst Quilt


Design based on specifications requested by our customers

Double cutaway, light weight, mahogany, arch top body

27" scale, 3 piece, maple, bolt-on neck with 15 radius and rosewood fret board

Cepheus "Alpha" passive pickup in the bridge position and Cepheus "Beta" in the neck position with master volume control, tone control, and 3 way switch - cavity has been routed large enough to accommodate additional electronics

String through body "Agile -8" bridge for improved sustain - now also with staggered string-through holes for improved intonation

Dual adjustable truss rods

Die cast Grover Rotomatic tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)

Reverse headstock

Read the "Customer Comments" link for more about the joys of playing this guitar!

Qty Price: $339.95



  • Details
  • Specifications
  • Video
  • Customer Comments
  • FAQ
  • Accessories

New Agile 8 String Septor!

  • Designed based on specifications requested by our customers
  • Double cutaway, light weight, mahogany, arch top body with gloss finish
  • Genuine Canadian maple quilted top
  • 27" scale 3 piece, maple, bolt-on neck with 15 radius
  • Rosewood fretboard with no markers - position markers are located on the side of the neck
  • Cepheus "Alpha" passive pickup in the bridge position and Cepheus "Beta" in the neck position with master volume control, tone control, and 3 way switch - cavity has been routed large enough to accommodate additional electronics
  • String through body "Agile -8" bridge for improved sustain - now also with staggered string-through holes for beautiful intonation
  • Dual adjustable truss rods in neck to offset alterations caused by changes in humidity, temperature, or new strings
  • Die cast Grover Rotomatic tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
  • One volume control, one tone control, and a 3-way pickup selector switch allow a wide range of expressive control
  • 24 jumbo frets
  • Reverse headstock
  • Made in South Korea
  • Measurements:

  • Total length: 42 1/2"
  • Scale length: 27"
  • Width of the upper bout: 10 1/2"
  • Width of the lower bout: 12 1/4"
  • Body thickness at the edge: 1 1/2"
  • Width of the neck at the nut: 2 1/8" (54.5 mm)
  • Width of the neck at the 12th fret: 2 3/4" (70.5 mm)
  • String spacing at the nut: 7 mm (46.25 mm overall)
  • String spacing at the bridge: 10 mm (73.5 mm overall)
  • String gauges: .009, .012, .015, .022, .030, .040, .054, .074
  • Weight: only 10 pounds!
  • Wiring Diagram

    Customer Comments:

    Absolutely love it! The neck is a perfect size, great for long gigs without tiring your hand. The finish is flawless and absolutely beautiful. The pickups have a great low end to bring out the creaminess of the lowest string (I tune mine ebgdaEBE) Highly recommended!
    By Micah Smith

    The guitar amazing. The finish is astonishing; especially under stage lighting. The fret board is smooth and the neck is the perfect size. It's right between a wizard III profile and a Schecter neck. The scale length make the low end sound massive, but there's absolutely no head diving. The only thing that could be improved is the pickups. However, if you like a smoother low end and creamy high end, then these pups will be perfect for you. I like a little bit more bight on my low end though. I'll be switching them to black outs or emgs soon. Haven't decided yet. But seriously, this guitar is amazing.
    Ryan

    Taking into consideration, it was going to be my first 27" scale guitar as well as my first 8 string I spent quite a lot of time reading through forums on the internet before I ordered it. When it arrived I was amazed with the quality of build. Believe or not, it looks much better than it looks on the picture. The guitar is hand-crafted in South Korea and feels solid. The body design is just amazing. The stock pickups sound much better than I expected them to sound. It came with a pretty high action, but it took a minute to lower it. You might consider the fact that the neck is quite heavy compared to the body, so use a wide leather strap to avoid neck-diving. I have been using it for a few weeks so far, and haven't noticed any problems with it. This guitar is a great deal for it's price!
    Alexander

    Definitely worth the money for a starter 8 string guitar...it feels natural and has a 27" scale neck with the jumbo fret combo makes playing it easier. In my opinion it's worth the buy - comfortable, affordable, and the seller is very good about customer service as well.
    Bryce Prentice

    Question: What is the difference between the Septor, the Septor Pro, and the Septor Elite?
    Answer: The original Septor has a 3 piece, maple, bolt-on neck. The Septor Pro and Septor Elite have the 5 piece neck-through body design. The Septor Pro has the Cepheus TOM bridge with graphite saddles and staggered string-through holes for improved intonation. The Septor Elite has the Cepheus high mass extended range fixed bridge, which offers the saddle for the widest range of tunings and non-standard string gauges. (The original Septor could have either the Cepheus TOM bridge or the Cepheus high mass extended range fixed bridge, depending on the particular model.) Both bridges are excellent and offer ultra-fine tuning. Choosing which bridge is for you is simply a matter of preference.

    Question: I received my Agile and there is some fret buzz. What do I do?
    Answer: Your guitar was set up and buzz free when it was shipped. However the neck may have moved during shipment. This video should help: Set Up Tips.

    Question: What is your return policy for this item?
    Answer: See our detailed policy by clicking on "Return Policy" on the right side of the home page.

    Question: Where are Agile guitars made?
    Answer: Agile guitars are made in South Korea and Vietnam